Tested and working. Autofocus is fast and accurate, and the focus ring and manual focus clutch operate smoothly. Optics are clean and clear. Light cosmetic wear only, consistent with careful professional use. Comes with the Olympus LH-66B lens hood, Olympus front cap, ProMaster HGX Prime 62mm protection filter and a padded Tenba lens case. Please see photos for exact condition.

Olympus M.Zuiko Digital ED 25mm f/1.2 PRO – Micro Four Thirds

Olympus's flagship standard prime is exceptionally sharp even wide open, with smooth, natural bokeh. It's ideal for portraits, street, events, low light and video.

Features

• 25mm focal length, a classic 50mm equivalent field of view
• Ultra-fast f/1.2 aperture for shallow depth of field and low-light shooting
• Fast, near-silent autofocus, well suited to stills and video
• Manual focus clutch: pull the ring back for instant manual focus with distance and depth-of-field scales
• Programmable L-Fn button on the barrel
• Splash, dust and freeze proof construction
• Close focus of 0.3 m
• 62mm filter thread
• Compatible with all Micro Four Thirds bodies (Olympus/OM System, Panasonic Lumix, Blackmagic and more)

Included

• Olympus M.Zuiko 25mm f/1.2 PRO lens
• Olympus LH-66B lens hood
• Olympus front lens cap
• ProMaster HGX Prime 62mm protection filter
• Padded Tenba lens case

Tested and working. Autofocus is fast and accurate, and the zoom and focus rings turn smoothly. Optics are clean and clear. Very light cosmetic wear only. Comes with a ProMaster HGX Prime 82mm protection filter, lens hood, front cap and padded Sigma case. Please see photos for exact condition.

Sigma 10-20mm f/3.5 EX DC HSM – Nikon F Mount

This is the constant-aperture version of Sigma's popular ultra-wide zoom for APS-C (DX) DSLRs. It's great for landscapes, architecture, real estate, interiors and travel.

Features

• 10–20mm ultra-wide zoom, about 15–30mm equivalent on APS-C
• Constant f/3.5 aperture throughout the zoom range, a step up from the older f/4–5.6 version
• HSM (Hypersonic Motor) for fast, quiet autofocus
• AF/M switch on the barrel
• Close focus of 0.24 m
• EX series build quality
• 82mm filter thread
• Designed for APS-C/DX bodies

Included

• Sigma 10-20mm f/3.5 EX DC HSM lens
• Petal lens hood
• Front lens cap
• ProMaster HGX Prime 82mm protection filter, worth having given the price of 82mm filters
• Padded Sigma lens case

Tested and working. Autofocus is fast and accurate, and the focus ring turns smoothly. Optics are clean and clear. Moderate cosmetic wear consistent with professional use, including light scuffs on the barrel near the mount and some marks on the rubber focus ring. Comes with a lens hood, front cap, ProMaster HGX 77mm UV filter and padded lens case. Please see photos for exact condition.

Sigma 50mm f/1.4 DG HSM Art – Nikon F Mount

Sigma's acclaimed Art series 50mm is known for outstanding sharpness wide open and beautiful, creamy bokeh. It's a favourite for portraits, weddings, events and low-light work.

Features

• Full-frame (DG) coverage, and also works on APS-C/DX bodies as a roughly 75mm portrait lens
• Fast f/1.4 aperture for shallow depth of field and low-light shooting
• HSM (Hypersonic Motor) for fast, quiet autofocus with full-time manual override
• AF/MF switch and distance scale window
• Close focus of 0.4 m
• 77mm filter thread
• Compatible with the Sigma USB Dock for firmware updates and AF fine-tuning

Included

• Sigma 50mm f/1.4 DG HSM Art lens
• Sigma lens hood
• Sigma front lens cap
• ProMaster HGX 77mm UV filter
• Padded lens case

Optics are clean and clear. Focus and aperture rings turn smoothly. Light cosmetic wear to the barrel and the built-in hood, consistent with careful professional use. Front cap and padded lens pouch included. Please see photos for exact condition.

Samyang 14mm f/2.8 ED AS IF UMC – Nikon F Mount

This ultra-wide full-frame prime is a favourite for astrophotography, architecture, real estate and landscapes. It's known for being very sharp for the price.

Features

• 14mm ultra-wide angle, full-frame coverage (about 21mm equivalent on APS-C)
• Fast f/2.8 aperture, great for night skies and low light
• Manual focus with a smooth, well-damped focus ring and a hard infinity stop
• Close focus of 0.28 m for dramatic foreground-heavy compositions
• ED and aspherical elements with UMC multi-coating to control distortion and flare
• Built-in petal lens hood
• Nikon F mount, which also adapts easily to mirrorless bodies

Included

• Samyang 14mm f/2.8 lens
• Front lens cap
• Padded lens pouch

Tested and working. Autofocus is fast and accurate, VC stabilisation operates correctly, and the focus ring and all switches work as they should. Optics are clean and clear. Light cosmetic wear consistent with professional use. Comes with the front and rear caps, a ProMaster 58mm UV filter and a Lowepro padded lens case. Please see photos for exact condition.

Tamron SP 90mm f/2.8 Di VC USD 1:1 Macro (F004) – Nikon F Mount

Tamron's celebrated 90mm macro, the version with both stabilisation and ultrasonic autofocus. It delivers true 1:1 life-size reproduction and is exceptionally sharp, and it doubles as a superb portrait lens thanks to its smooth, flattering rendering.

Features

• True 1:1 life-size macro reproduction
• 90mm focal length: full-frame coverage, and about 135mm equivalent on APS-C
• Fast f/2.8 maximum aperture
• VC (Vibration Compensation) image stabilisation, a real advantage for handheld close-up work
• USD (Ultrasonic Silent Drive) autofocus: fast, quiet and accurate, with full-time manual override
• Focus limiter (Full / 0.5m–∞ / 0.3m–0.5m) for faster AF
• Minimum focus distance of 0.3m
• Internal focusing, so the barrel doesn't extend and the front doesn't rotate — ideal for polarisers and ring flashes
• Moisture-resistant construction
• 58mm filter thread
• Model F004, made in Japan

Included

• Tamron SP 90mm f/2.8 Di VC USD Macro lens
• Tamron front lens cap
• Rear lens cap
• ProMaster 58mm UV filter
• Lowepro padded lens case

Tested and working. The camera powers up, both lenses capture correctly, and the Wi-Fi, shutter and mode buttons all function as they should. Light cosmetic wear consistent with professional use, including minor marks to the body. Both lens domes are clear of scratches. Comes with a padded soft case. Please see photos for exact condition.

Ricoh Theta S 360° Spherical VR Camera

The camera that made 360° photography easy. Two opposed fisheye lenses capture the entire scene in one press, and the camera stitches it in-body, so there's no software to wrestle with. It's ideal for real estate, virtual tours, VR content, events and social media.

Features

• Fully spherical 360° x 360° capture from two f/2.0 fisheye lenses
• 14MP stills (5376 x 2688), stitched in-camera
• Full HD 1080p 30fps 360° video, up to 25 minutes per clip
• 8GB internal memory, roughly 1,600 stills or 65 minutes of video
• Built-in Wi-Fi with the Theta app for iOS and Android: live view, remote shutter and instant sharing
• Live streaming over USB or HDMI for 360° webcam and broadcast use
• Shutter priority and ISO priority modes, plus full manual with long exposures to 60 seconds
• Interval shooting and self-timer
• Micro USB and micro HDMI ports
• 1/4"-20 tripod thread in the base
• Pocket-sized at about 125g

Included

• Ricoh Theta S camera
• Padded soft case

Please note: no USB cable is included. It charges and transfers over standard micro USB. Output is compatible with Google Street View, Facebook 360, YouTube 360 and most VR platforms.

Tested and working. The lens mount is clean and undamaged, the contacts are bright, and the USB port is in good order. Excellent cosmetic condition with only minimal signs of use. Comes with the rear cap. Please see photos for exact condition.

Sigma USB Dock UD-01NA – Nikon F Mount

Sigma's lens dock lets you update firmware and fine-tune your Sigma Global Vision lenses yourself, using the free Sigma Optimization Pro software. It's the tool that turns a slightly front- or back-focusing Sigma into a perfectly calibrated one.

Features

• Firmware updates for compatible Sigma lenses, direct from Sigma
• Autofocus fine-tuning, adjustable at four focus distances (and at four focal lengths on zooms), which is far more precise than in-camera AF microadjustment
• Customise OS (optical stabiliser) behaviour
• Set custom focus limiter ranges
• Adjust manual focus ring throw and direction on compatible lenses
• Two custom mode settings that you can save to the lens's C1 and C2 switch positions
• Works with the free Sigma Optimization Pro software for Windows and macOS
• Model UD-01NA, for Nikon F mount Sigma lenses
• Made in Japan

Compatible with
Sigma Global Vision lenses in the Art, Contemporary and Sports lines, in Nikon F mount. Older, pre-Global Vision Sigma lenses are not supported.

Included

• Sigma USB Dock UD-01NA
• Rear cap

Good used condition. The sprung frame twists down and pops open correctly, with no kinks or broken sections. The fabric is clean and evenly coloured, with no rips, tears or stains. Please see photos for exact condition.

Collapsible TwistFold Chroma Key Blue Background

A pop-up blue screen for green-screen-style keying, video calls, interviews, streaming and studio portraits. The sprung frame opens instantly and twists down into a flat disc, so it's much faster to set up than a stand-and-cloth backdrop.

Features

• Chroma key blue, for clean keying in Premiere Pro, After Effects, DaVinci Resolve, OBS and similar
• Sprung steel TwistFold frame: pops open in seconds and collapses to about a third of its open size
• Blue on both sides, so it doesn't matter which way you set it up
• Matte, non-reflective fabric with an even finish that keys cleanly when lit evenly
• Freestanding against a wall, or mount it on a stand with a backdrop clamp or holder
• Lightweight and easy to carry to location
• Ideal for interviews, talking heads, streaming, virtual sets and product work

Untested and sold as-is. We have not loaded film, fitted batteries or checked the meter, shutter speeds or auto-exposure mode. Cosmetically good, with light wear consistent with age. The light seals on the back door have deteriorated and will need replacing, as is typical for a camera of this era (see photos). The film door opens and closes properly. Lens and 52mm protection filter included. Please review all photos carefully and treat this as a camera for restoration or parts. No returns for functional issues.

Ricoh KR-10X 35mm Film SLR with XR Rikenon 50mm f/2 L Lens – Untested

A classic 1980s Pentax K-mount SLR, paired with the well-regarded XR Rikenon 50mm f/2 L standard lens.

Camera features

• Pentax K-mount, so it takes a huge range of affordable vintage lenses
• Aperture-priority auto exposure (A) plus full manual mode
• Electronically controlled shutter from 16 s to 1/1000 s, plus Bulb
• ASA 12–3200 film speed dial with ±2 stop exposure compensation
• Self-timer
• Hot shoe with X-sync

Lens

• XR Rikenon 50mm f/2 L
• Aperture range f/2–f/16
• 52mm filter thread
• Fitted with an HGX 52mm protection filter

Included

• Ricoh KR-10X body
• XR Rikenon 50mm f/2 L lens
• HGX 52mm protection filter

Condition – please read
This camera is untested and is sold as-is. We have not run film through it or checked the electronics, meter or shutter. The door light seals have perished and will need replacing before use. It would suit a hobbyist, a restorer, or anyone who wants the lens alone.

New in box. This is an unused spare that has been held in our stock, still in its original DJI retail packaging. The box shows light shelf wear from storage. Please see photos for exact condition.

DJI Focus Motor Rod Mount – Ronin-S Spare Part 18 (RS686204007)

The genuine DJI rod mount for attaching a DJI focus motor to a Ronin gimbal. It's the bracket-and-rod set that lets you position the motor correctly against your lens gear.

Features

• Genuine DJI part, Ronin-S Spare Part 18
• Clamps to the gimbal's camera mounting plate and holds the focus motor on a rod
• Multiple mounting holes along the arm, so you can set the motor height and offset to suit different lenses
• Two rod lengths supplied, for short primes through to longer zooms
• All-metal construction with a matte black finish
• Part number RS686204007

Included

• Focus motor rod mount bracket with clamp
• 2 x mounting rods (long and short)

Compatible with

• DJI Ronin-S and the DJI focus motor
• Also commonly used with the RS 2, RSC 2 and RS 3 series focus motor setups

Good used condition. The sprung frame twists down and pops open correctly with no kinks or broken sections. The mid grey side is clean and evenly coloured. The white side has a few small light brown marks in the upper left area (visible in the photos), which sit outside the usual head-and-shoulders framing area and are easy to retouch or crop out. No rips or tears. Light creasing from storage, which relaxes once it's been open for a while. Please see photos for exact condition.

Lastolite Collapsible Background – White / Mid Grey – approx. 1.5 x 1.8m

Two of the most useful portrait backgrounds in one panel. The sprung frame pops open in seconds and twists flat for storage, so it's far quicker to set up than a stand-and-roll backdrop.

Features

• Reversible: clean white on one side, mid grey on the other
• Approx. 1.5 x 1.8m open, folding to roughly 70cm
• Sprung steel frame that pops open instantly and twists down flat
• Matte, non-reflective fabric with an even finish and no hotspots
• The grey side lights to anything from near-black to near-white, depending on how much light you put on it
• The white side doubles as a bounce or reflector panel
• Freestanding against a wall, or mount it on a stand with a background support or clamp
• Lightweight and easy to carry to location, so it's ideal for headshots, corporate portraits, staff photos, passport work and on-location sessions

Tested and working. The unit powers up correctly, the touchscreen responds accurately, and the HDMI in and out, headphone jack and battery contacts all function as they should. Light cosmetic wear consistent with professional use, with minor marks to the screen bezel and housing. Body only, with no batteries, caddies or cables included. Please see photos for exact condition.

Atomos Ninja 2 – HDMI Field Recorder & Monitor (Body Only)

The Ninja 2 records straight off your camera's HDMI output to edit-ready ProRes, bypassing in-camera compression entirely. It's a well-proven, affordable way to get better footage and a bigger monitor out of a DSLR, mirrorless or video camera.

Features

• Records 10-bit 4:2:2 Apple ProRes (HQ, 422, LT) direct from HDMI, far better quality than most in-camera codecs
• 5" 800x480 touchscreen monitor with a capacitive interface
• Monitoring tools including focus peaking, zebras, false colour, blue only and waveform
• HDMI in and HDMI out for loop-through to another monitor
• Records to affordable off-the-shelf 2.5" SSDs or HDDs via the Master Caddy system
• Dual NP-F (Sony L-series) battery slots with continuous power, so you hot-swap batteries without stopping the recording
• Headphone jack with audio level monitoring
• Records timecode and supports HDMI trigger start/stop from compatible cameras
• 1/4"-20 mounting points on the top and bottom for rigs, arms and cages
• Lightweight aluminium body

Included

• Atomos Ninja 2 unit only

Sold for parts or repair, not working. This Ronin-SC has come out of our hire fleet and is being sold as-is for spares or repair. We are not representing it as functional and it has not been fully tested. The motors, gimbal arms, quick-release plates and mounting hardware are all physically intact, and the case and accessories are in good order. Moderate cosmetic wear consistent with professional use. Please review all photos. Sold as-is with no returns for functional issues.

DJI Ronin-SC 3-Axis Gimbal Stabiliser – Parts or Repair, Not Working

A complete DJI Ronin-SC kit in its original moulded case, sold for parts or repair. A useful buy if you already own an SC and want spare arms, plates, a grip, a case or the accessory set, or if you're comfortable repairing one yourself.

Please read: this gimbal is not working and is sold as-is for spares or repair. We are not able to say what is or isn't functional. Do not buy this expecting a working stabiliser.

What it is
The Ronin-SC is DJI's lightweight single-handed 3-axis gimbal for mirrorless cameras, rated to 2kg. The parts here are the standard SC kit:

Included

• DJI Ronin-SC gimbal body with all three motor arms
• Original DJI moulded carry case with strap
• Extended grip / tripod handle
• Mini tripod base
• Quick-release camera plate and base plate
• Lens support bracket
• Accessory clamp
• Multi-camera control cables
• Hex tools and mounting screws

Complete and functional. All rod clamps and thumbscrews tighten firmly, the follow focus turns smoothly and engages the drive gear correctly, and the matte box barn doors open and close as they should. Light to moderate cosmetic wear consistent with professional use, including scuffs to the rails and matte box. The shoulder pad fabric is fraying slightly at one edge, which is visible in the photos and doesn't affect use. Please see photos for exact condition.

Glanz DSLR Shoulder Rig – Complete Kit with Follow Focus and Matte Box

A full shoulder-mounted support system for DSLR and mirrorless video. It gets the camera off your hands and onto your shoulder for steadier handheld work, and it's a cost-effective way into a proper rig setup.

Features

• Padded shoulder mount that distributes weight for longer handheld takes
• Dual adjustable handgrips with textured rubber, adjustable for angle and spacing
• Standard 15mm rod system, so it's compatible with most third-party rig accessories
• Quick-release baseplate with a 1/4"-20 camera screw, height and position adjustable
• Follow focus unit with a hard-stop marking disc and a geared drive wheel for smooth, repeatable pulls
• Matte box with four adjustable barn doors to control flare and stray light
• Counterweight mount at the rear of the shoulder pad for balancing longer lenses
• Everything breaks down with thumbscrews, so it packs flat for transport
• Works with any DSLR, mirrorless or small cinema camera with a 1/4"-20 tripod thread

Included

• Glanz shoulder rig with shoulder pad and counterweight mount
• 2 x handgrips
• 15mm rods and clamps
• Quick-release baseplate
• Follow focus unit
• Matte box with barn doors

The motor and light meter have been tested and both work correctly. The zoom and focus rings operate smoothly, the film door opens and closes properly, and the film chamber is clean. Please note we have not run a roll of film through it, so film transport and exposure on film are unverified. Optics are clear. Light cosmetic wear consistent with age, including minor marks on the lens barrel and top plate. Wrist strap included. Please see photos for exact condition.

Canon Zoom 318 Super 8 Movie Camera

A compact, well-built Super 8 cine camera from the early 1970s, with Canon's fast 10–30mm f/1.8 zoom. It's a great entry into shooting Super 8, and it looks the part on a shelf too.

Features

• Canon Zoom Lens C-8 10–30mm f/1.8, a 3x zoom with a genuinely fast maximum aperture for low light
• Reflex viewfinder, so you see through the taking lens
• CdS through-the-lens metering with automatic exposure
• Manual zoom and focus, with a focus scale in metres and feet
• Film footage counter on the side
• Electric film drive
• Built-in Type A conversion filter
• Cable release and remote sockets
• Tripod socket in the base
• Takes standard Super 8 cartridges
• Made in Japan

Included

• Canon Zoom 318 Super 8 camera
• Wrist strap

Excellent condition. The honeycomb core is clean and undamaged with no crushed or bent cells, and all of the spring clips are intact and hold firmly. Light cosmetic wear only, with minor marks to the black housing. Please see photos for exact condition.

Profoto Grid Small 10° Honeycomb Grid

A genuine Profoto 10° honeycomb grid, the tightest in the small range. It narrows the beam to a controlled pool of light with a soft-edged falloff, and it's the go-to for hair lights, rim and kicker lights, background pools and tight product highlights.

Features

• Genuine Profoto Grid Small, 10° beam angle
• Precision honeycomb core that tightens the beam and stops spill without changing colour temperature
• Spring clips for fast, secure mounting and removal
• Stackable with a second grid or a gel holder for finer control
• Matte black anodised housing and blackened core, so there's no internal reflection or flare
• Built to Profoto's usual standard, with no plastic

Included

• Profoto Grid Small 10° honeycomb grid

Tested and working. The motor runs smoothly and the gear engages correctly, and the rod mount and clamps tighten firmly with no stripped threads. Light cosmetic wear consistent with professional use. Comes with the rod mount bracket, two rods, hex key, flexible lens gear strip and the padded case. Please see photos for exact condition.

DJI Focus Motor Kit (Focus Motor 2006)

DJI's compact follow focus motor for the Ronin gimbal system. It gives you smooth, repeatable motorised focus pulls, and it's a big step up from pulling focus by hand on a gimbal.

Features

• Motorised focus control for precise, repeatable pulls
• Works with DJI Ronin gimbals including the RS 2, RSC 2, RS 3, RS 3 Pro and RS 4 series
• Controlled from the gimbal's front dial, the Ronin app, or a DJI Master Wheels / Force Pro controller
• FIZ port for daisy-chaining a second motor for iris or zoom
• Automatic lens calibration, which sets the focus end stops for you
• Quiet operation, so it doesn't intrude on recorded audio
• Rod-mounted for quick repositioning and easy lens swaps
• Includes a flexible gear strip that fits most lenses without a dedicated gear ring

Included

• DJI Focus Motor (2006)
• Rod mount bracket with clamp
• 2 x mounting rods (long and short)
• Flexible lens gear strip
• Hex key
• Padded zip case

Brand new and never used. This backdrop has been in storage as part of our hire stock and has never gone out on a job. No rips, tears, holes, marks or fading. Creased from being folded in storage, as is normal for a cotton backdrop, and the creases will hang out over time or can be steamed. Comes with its cotton drawstring storage bag. Please see photos for exact condition.

Hand-Dyed Cotton Muslin Backdrop – "Purple Rain" – 3m x 3.6m – Never Used

A large hand-dyed cotton backdrop in mottled purple and cream. The organic, cloudy pattern gives portraits a painterly, studio-classic look, and it photographs very differently depending on how you light it: rich and saturated under a hard key, soft and pastel when lit flat.

Features

• Generous 3m x 3.6m size, big enough for full-length portraits and small groups
• 100% cotton muslin: matte, non-reflective and virtually no glare under studio lights
• Hand-dyed "Purple Rain" mottled pattern, so no two are identical
• Lightweight and easy to hang from a backdrop stand, crossbar, clamps or a wall
• Can be hung flat for a clean look or gathered for texture and depth
• Works equally well for portraits, headshots, fashion, family and maternity sessions
• Machine washable and easy to fold away for transport

Included

• Hand-dyed cotton backdrop, 3m x 3.6m
• Cotton drawstring storage bag

Tested and working. The legs fold and lock smoothly, the pivot bolt is firm with no play, and the 1/4" thread is clean and undamaged. Light cosmetic wear to the black finish, consistent with professional use. It has an asset barcode sticker on one leg. Please see photos for exact condition.

Nanlite LS-FL-1/4 Floor Stand

A compact folding floor stand for mounting lights, tubes and accessories close to the ground. It's ideal for uplighting, low-angle kickers, floor-level practicals and hiding a light inside a set.

Features

• Three folding metal legs that fan out for a stable, low-profile base
• 1/4"-20 male screw thread on the knurled head, so it takes most small lights, tube lights, ball heads, clamps and accessories
• Sits very low, letting you place a light where a normal stand can't reach
• All-metal construction with a matte black finish that won't reflect into shot
• Folds flat for storage and travel, small enough for any kit bag
• Lightweight, so it's quick to reposition on set

Included

• Nanlite LS-FL-1/4 floor stand

Tested and working. The shutter button and HOLD lock both operate correctly, and the cable and connector are in good order with no fraying or bent pins. Light cosmetic wear consistent with professional use. Please see photos for exact condition.

Nikon MC-DC2 Remote Release Cord

The genuine Nikon wired remote release for 10-pin-free Nikon bodies. It lets you fire the shutter without touching the camera, which is essential for long exposures, astrophotography, macro, landscapes and tripod work.

Features

• Genuine Nikon MC-DC2, roughly 1m cable
• Half-press to focus, full press to fire, just like the camera's shutter button
• Slide-forward HOLD lock for Bulb exposures, so you can keep the shutter open without holding the button
• Eliminates camera shake from pressing the shutter
• No batteries required, as it draws power from the camera
• Locking connector collar so it won't pull out mid-shoot

Compatible with

• Nikon Z series: Z 5, Z 6, Z 6II, Z 7, Z 7II, Z 50, Z fc, Z 30
• Nikon DSLRs: D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D750, D610, D600, D600, D90, D3300, D3200, D3100
• Also Nikon Coolpix P1000, P950, P7800 and similar

Included

• Nikon MC-DC2 remote release cord